Panasonic WV-LC1710 - Manuel (Page 8)

8
l Audio Output Connector (AUDIO OUT)
The audio input signal connected to the audio input connector
is looped through this connector.
m S-Video Input Connector (S-VIDEO IN)
This connector is used to input S-Video signal.
n Video Input Connector (VIDEO IN)
This connector is used to input Composite Video signal.
o Video Output Connector (VIDEO OUT)
The video input signal connected to the video input con-
nector is looped through to this connector and terminated
automatically.
Timing Data Chart for PC input
p Component Video Input Connectors (COMPONENT
IN Y, Cb, Cr)
These connectors are used to input Component Video signal
(Y, Cb, Cr).
q PC Input Connector (PC IN)
This connector is used to input analog RGB signal from PC.
Supported Timing Data are shown below.
r DC Input Connector (DC IN)
This connector is used to plug the AC Adapter (supplied as
a standard accessory).
s Security slot
This slot can be used to insert lock based on Industry Standard
Specification (3 ~ 3.26 mm × 7 ~ 7.26 mm × 2.5 ~ 4 mm) for
theft prevention.
OUT OF RANGE
This monitor supports the timing data listed below. It also supports in part other timing data not listed on the table.
VESA: Video Electronics Standards Association
Notes:
• OUT OF RANGE is displayed on the center of the screen when the input resolution
specifications (Dot Clock Frequency, Horizontal Frequency, Vertical Frequency) are not
supported by this monitor.
• This is not a plug and play monitor.
Vertical Frequency
(Hz)
59.93
72.81
75.00
85.00
56.25
60.32
72.19
75.00
85.06
60.00
70.07
75.03
85.00
60.02
75.02
Horizontal Frequency
(Hz)
31.46
37.86
37.50
43.26
35.16
37.88
48.08
46.88
53.67
48.36
56.48
60.02
68.68
63.98
79.98
Dot Clock Frequency
(MHz)
25.17
31.50
31.50
36.00
36.00
40.00
50.00
49.50
56.25
65.00
75.00
78.75
94.50
108.00
135.00
Resolution
640 Ч 480
640 Ч 480
640 Ч 480
640 Ч 480
800 Ч 600
800 Ч 600
800 Ч 600
800 Ч 600
800 Ч 600
1024 Ч 768
1024 Ч 768
1024 Ч 768
1024 Ч 768
1280 Ч 1024
1280 Ч 1024
Standard
Industry
VESA
Standard