Porter-Cable HL5211 - Manuel (Page 9)

Making toast
1. Plug the toaster into a 110/120V-power outlet and turn the power
on.
2. The toaster will only latch down when the cord is plugged in and the
power turned on.
3. To toast, set the toasting control to the desired setting (1 is the
lightest setting and 5 is the darkest setting) before engaging the toast
lever. For frozen bread, set the toasting setting to (
y) defrost setting
before engaging the Toast lever.
Warning:Toasting performance will vary with the type of bread,
especially bread that contains higher sugar contents, e.g. fruitbread.
For these kinds of bread the toasting setting must be reduced.
4. Place bread in slot(s) and lower the toast lever until it engages or
locks in. NOTE:The toast lever will not engage if the toast control
dial is in the (0) OFF / cancel position or if the toaster is unplugged
from the power supply. After the selected toast colour has been
achieved, the toast will pop up automatically, ready for removal from
the slots.
5. To immediately stop the toasting process at any time, lift the toast
lever up lightly. In addition, you can also use the control dial and turn
to (0) OFF position.
If the toast gets stuck in the bread carrier and will not pop up, the
auto-cancel circuit shuts off the heating elements automatically.
Unplug the toaster and carefully remove the toast once the unit has
cooled down.Take care not to damage the internal element of the
toaster.
6. Remove the plug from the outlet.
CAUTION: Do not wrap the cord around the main body of the
toaster during or after use.The cord wrap (storage) facility is located
on the underside of the toaster.
ENGLISH
9