Panasonic BT-H1700P - Manuel (Page 23)

ENGLISH
SPECIFICATIONS (INPUT CARD: OPTIONAL)
Ⅵ BT-YA701P: VIDEO INPUT CARD
Type : Video input card for multi-format monitor
Inputs/Outputs : VIDEO 1/VIDEO 2: 2 lines, BNC connector x 4 (1 V (p-p), 75 Ω)
Synchronised signal (EXT.SYNC): 1 line, BNC connector x 2 (1.0 V – 4.0 V (p-p), 75 Ω)
* The input (IN) and output (OUT) terminals are bridge-connected. Auto termination.
Y/C signal
: 1 line, input only, mini-DIN 4-pin connector x 1 (Y/C input has a priority to a
VIDEO 2 input) (Y: 1 V (p-p), 75 Ω/C: 0.286 V (NTSC)/0.3 V (PAL), 75 Ω)
Audio signal : 2 lines (monaural), RCA pin x 4 (0.5 V (rms), high impedance)
* The input (IN) and output (OUT) terminals are bridge-connected.
Required slots : 1
Power consumption : 14 V DC, 0.25 A
7 V DC, 0.15 A
Weight : 0.5 k g
Dimensions
(W x H x D)
: 43 mm x 154.5 mm x 191.9 mm
Ⅵ BT-YA702P: COMPONENT/RGB INPUT CARD
Type : Component/RGB input card for multi-format monitor
Inputs/Outputs : Component (Y, P B /B-Y, P R /R-Y) or RGB: 1 line, BNC connector x 6
(Y: 1 V (p-p), 75 Ω/P
B , B-Y, P R , R-Y, R, G, B: 0.7 V (p-p), 75 Ω)
Synchronised signal (HD/C S , VD) : 1 line, BNC connector x 4 (1.0 V – 4.0 V (p-p), 75 Ω)
* The input (IN) and output (OUT) terminals are bridge-connected. Auto termination.
Audio signal : 1 line (monaural), RCA pin x 2 (0.5 V (rms), high impedance)
* The input (IN) and output (OUT) terminals are bridge-connected.
Required slots : 1
Power consumption : 14 V DC, 0.02 A
Weight : 0.5 k g
Dimensions
(W x H x D)
: 43 mm x 154.5 mm x 191.9 mm
Ⅵ BT-YA703P: SDI INPUT CARD
Type : SDI input card for multi-format monitor
Inputs/Outputs : Digital input (SDI 1/SDI 2): 2 lines, BNC connector x 2 (0.8 V (p-p), 75 Ω)
Digital output (SWITCHED OUT): 1 line, BNC connector x 1 (0.8 V (p-p), 75 Ω)
Audio signal: 2 lines (monaural), RCA pin x 4 (0.5 V (rms), high impedance)
* The input (IN) and output (OUT) terminals are bridge-connected.
Format : D1 serial component digital, 525/625 auto switching (compliant to SMPTE259M)
Required slots : 1
Power consumption : 7 V DC, 0.65 A
Weight : 0.5 k g
Dimensions
(W x H x D)
: 43 mm x 154.5 mm x 191.9 mm
Ⅵ BT-YA704P: HD SDI INPUT CARD
Type : HD SDI input card for multi-format monitor
Inputs/Outputs : Digital input (HD SDI 1/HD SDI 2): 2 lines, BNC connector x 2 (0.8 V (p-p), 75 Ω)
Digital output (SWITCHED OUT): 1 line, BNC connector x 1 (0.8 V (p-p), 75 Ω)
Audio signal: 1 line (monaural), RCA pin x 2 (0.5 V (rms), high impedance)
* The input (IN) and output (OUT) terminals are bridge-connected.
Format : HD serial component digital, SMPTE292M, SMPTE274M, SMPTE296M,
SMPTERP 1920 X 1080 24psF
Required slots : 1
Power consumption : 14 V DC, 0.72 A
Weight : 0.7 k g
Dimensions
(W x H x D) : 43 mm x 154.5 mm x 200.2 mm
23