Proctor-Silex 994 - Manuel (Page 6)

6
Operation
Operating the Blender
w WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
w WARNING
Cut Hazard
Always lower cover onto jar before
operating blender.
Do not put spoon or other utensils
in jar when blending.
Failure to follow these instructions
can result in broken bones or cuts.
NOTE: Before you use the blender for the
first time, wash the jar, cover, and dosing
cup. Refer to “Caring for the Blender.”
To operate the blender, proceed as follows:
1. Place the blender on a clean, dry, level
surface, and set the Speed control to “0”
(Off position).
2. Place the ingredients to be blended into
the jar.
3. Place the jar onto the base. Make sure it
rests securely on the four jar supports.
4. Lower the cover onto the jar.
5. Set the Speed control to the desired
position. The “1” position is the lowest
speed and the “6” position is the highest
speed.
NOTE: If you want the blender to run at the
highest speed for short bursts, press the
Surge button. Release the Surge button to
return to the set speed.
6. When the blending is complete, set the
Speed control to “0.” The Surge button
will not function when the Speed control
is set at “0.”
7. Remove the food from the jar.
8. Clean the jar, cover, and dosing cup as
directed in “Caring for the Blender.”
Speed
control
Surge
button
Cover
Dosing
cup
840065000-1ENv01 9/27/04 11:26 AM Page 6