Proctor-Silex 994 - Manuel (Page 3)

IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances basic safety precautions should be
followed, including the following:
• Read the Operation Manual before using
blender.
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• To reduce risk of personal injury, unplug
cord from outlet when not in use, and
before putting on or taking off parts.
• Do not store any kitchen utensils in the
container since the blender would be
damaged if inadvertently turned On.
• To prevent possibility of serious personal
injury, keep hands out of blender jar while
operating blender.
• Inspect jar and cutter assembly daily.
Check cutter assembly for wear, nicks,
and loose or broken blades. Replace
jar and cutter assembly at least every
12 months.
• Always operate blender with jar, cover,
and dosing cup in place.
• When moving or repositioning the blender
base, always use the carrying handle. Do
not move or reposition base while unit is on.
3
–
SAVE THESE INSTRUCTIONS
–
• To reduce risk of personal injury and to
prevent damage to blender or jar and
cutter assembly, DO NOT insert utensils or
any metal objects into blender jar while
operating blender.
• To prevent damage to blender, jar, or cutter
assembly, DO NOT move or shake blender
while in operation. If blending action stops
during operation, turn blender OFF, remove
jar from base, remove jar cover, and use a
thin rubber spatula to push mixture
toward cutters.
• Do not submerge or wash the blender base
in a dishwasher.
• Do not spray the blender base with a
high-pressure spray gun.
• Disconnect power before cleaning.
• Disconnect power before servicing.
• To prevent burns from hot liquids splashing
out of the jar, always place cover and dos-
ing cup onto jar when blending. Never
exceed 12 cups of content when blending
hot contents.
• Only authorized specialists should repair
the blender or open the blender housing.
• Do not use outdoors.
Blender Safety
840065000-1ENv01 9/27/04 11:26 AM Page 3