Life Fitness T5i - Manuel (Page 26)

25
5
U
SER
M
ENU
The USER MENU makes it possible to change certain settings in the treadmill software
5.1 E
NTERING AND
U
SING THE
U
SER
M
ENU
Enter the USER MENU BY using one of two procedures:
Press the STOP key twice, and then hold down the ENTER key. The unit goes through a “warm” reset and beeps
three times, indicating that the USER MENU has been activated.
OR, hold down the ENTER key, and turn the treadmill on. The message "USER MENU" will appear. After about
one second, the MESSAGE CENTER displays the first menu item.
Use the ENTER key to scroll forward through the menu items. Use the STOP key to scroll backwards. There are
two ways to exit the menu: Press the STOP key continuously to return to the beginning of the menu; OR switch off
the treadmill. Doing so causes all settings to be saved.
5.2 U
SER
M
ENU
I
TEMS
U SER S TATISTICS
The User Statistics mode is used to display the current, accumulated statistics of the workouts stored under the My
Workouts feature. See Section, 5.3, titled Description Of User Menu Items.
To access statistics for a specific stored workout, press the MY WORKOUT key repeatedly until the name of that
stored workout appears in the MESSAGE CENTER. Then, press ENTER. Or, press the MY WORKOUT key once,
and then use the ARROW keys to scroll through the names. When the desired name appears, press ENTER.
Use the TIME ARROW keys to scroll backward and forward through the statistics. If the value for any statistical
item is greater than the listed maximum, the MESSAGE CENTER displays dashes, "----".
To clear statistics to zero: Press the SPEED UP ARROW key. The MESSAGE CENTER displays, "PRESS SPEED
DOWN ARROW KEY TO CLEAR STATS". Press the SPEED DOWN ARROW key. The statistics are cleared, and
the MESSAGE CENTER displays, "STATS CLEAR". If any other key is pressed after the SPEED UP ARROW is
pressed, the console cancels the clearing of the statistics. To re-activate the clearing process, press the SPEED
UP ARROW key again.
S ETTINGS
The values for three settings can be adjusted and saved: Pause Time, Sleep Time, and Units. Cycle through the
settings using the UP and DOWN ARROW keys. Use the TIME ARROW keys to change the settings. Any
adjustments are saved automatically. Revert a setting back to its default value by pressing the COOL DOWN key
S OFTWARE V ERSION N UMBERS
Use the UP and DOWN ARROW keys to toggle between displays of the current software version for the console,
and for the Motor Controller. The MESSAGE CENTER displays the Console Software Version number as
"CONSOLE VER=XX.X', where xx.x is the version number. For the Motor Controller, the MESSAGE CENTER
displays "MOTOR VER = XX.X".