La Crosse Technology WS-9626U-IT - Manuel (Page 11)

10
5. Insert the batteries to the second transmitter as soon as the outdoor temperature readings from
the first transmitter are displayed on the Weather station.
Note: User shall insert the batteries into the second transmitter within 25 seconds of reception of the
first transmitter.
6. The outdoor temperature from the second transmitter and the "channel 2" icon should then be
displayed on the Weather station. If this does not happen after 2 minute, the batteries will need to
be removed from all the units and reset from step 1.
7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the Weather station. Then within 2 minutes, the channel 3 outdoor data from the
third transmitter will be displayed and the channel icon will shift back to "1" once the third
transmitter is successfully received. If this is not happen, user shall restart the setting up from
step 1.
Note:
User shall insert the batteries into the third transmitter within 25 seconds of reception of the
second transmitter.