Koss KS5845-2 - Manuel (Page 21)

21
SETUP
LOCK SETUP
• When you open the LOCK setup page,
you will see the following picture:
• “Rating” is used to set the parent control
level.
• When you enter into this item, the
system will require you to input the
password, only the password is correct,
can you be permitted to change the
parent lock level. Then you must input
the password “3351”.
• If you find it wrong in the course of
inputting the password, press CLEAR
button to clear the inputted character.
• When you input the correct password,
you can use
/
buttons to change the
parent level. Provided are 9 levels
including 1~8 and unlock.
• Regarding to the levels, please refer to
the “PARENT CONTROL”. (Pg.19)
• When you complete the set in the setup,
you must eject/load the disc from the disc
slot, and then the function will come into
effect.
• “Password” setup is used to set the new
password or change the old password;
before you enter into this item, the system
will require you to input the old password,
only when the password is correct, can
you be permitted to change the password.
• “Country Code” is used to set the country
code. The code information standing for
original producing area country will be
written in every DVD disc when it is
produced. There are two characters
standing for the name of the country. For
example, CN for China, CA for Canada,
and so on. Only when the country code
you set in the SETUP menu matches with
the disc’s own country code, the parent
level that you set will come into effect.
The detail operation is:
• When you first set this item, it will display
“NEW” and require you to input a new
password, then input the password
again to confirm it.
• Then the first character of the country
code will be selected, you can use
/
buttons to select upward or downward
to confirm the first character;
• When you confirm the first character,
the second character will change into
all the characters that may match with
the first character to stand for the
corresponding country code;
• Then use
/
buttons to select the
second character;
• Press ENTER or OK button to confirm
the setting for country code.
Note:
If you have set a password in “Rating”
and “Password”, when you set the country
code, it will require you to input the
password. Only when the password is
correct, can you be permitted to change
the country code. If you select “Load
Default” in SETUP menu, the password
you have set will be cleared.
OTHERS SETUP
• When you enter into the OTHERS setup
page, you will see the following picture.
You can change the setting for Load
Default and Screen Saver.
• “Load Default” is used to revert to factory
initial settings.
• “Screen Saver” is used to switch on/off
the screen saver function.
LOCK
Rating
Password
Country Code Unlock
New
US
Select Move
LOCK
Rating
Password
Country Code Unlock
8 (Adult)
7
6
5
4
3
2
1 (Kids)
Select Move Prev.
OTHERS
Load Defaultl
Screen Saver Select
On
Select Move