KITCHENAID 4KFPM770 - Manuel (Page 12)

10
Preparing the Food Processor for Use
2. Fit the disc over the metal pin on
the disc stem, then rotate the disc
until it falls fully onto the stem.
Mini Bowl Assembly
1. Place the mini bowl inside the
work bowl over the power shaft.
Rotate the mini bowl until it falls
into place. When properly seated
in the work bowl, the mini bowl
cannot be rotated.
2. Fit the mini blade on the power
shaft. It may be necessary to
rotate the blade until it falls into
place.
The mini bowl can also be placed
in the chef’s bowl in a similar
manner.
3. To remove the mini bowl after
processing, lift the bowl using the
two finger grips located along the
top edge of the bowl.
Chef’s Bowl Assembly
Place the chef’s bowl inside the work
bowl over the power shaft. Rotate
the chef’s bowl until it falls into
place. When properly seated in the
work bowl, the chef’s bowl cannot
be rotated.
The chef’s bowl can only be used
with the slicing and shredding discs –
the multipurpose blade cannot be
used. To remove the chef’s bowl after
processing, lift the bowl using the
two finger grips located along the
top edge of the bowl.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.