SVAT Electronics 2.4 GHz Wireless B/W Security System - Manuel (Page 12)

Setting Up-Monitor
10
Turn on the monitor. The LED on the front of the monitor should light.
Using AC Power
Plug one end of the provided power adapter into a wall outlet and the other end into the rear
of the monitor.
Note: Use the adapter labeled OUTPUT: 13.5V DC.
Adjust the video image using the V-HOLD, CONTRAST and BRIGHTNESS
adjustment knobs on the back of the monitor, as needed.
Place the monitor in a convenient location, then adjust its antenna so that the front
(curved face) faces the room where the camera is set up. See "Orienting Units for
Optimal Performance", on page 12.
Fine Tuning
1
2
2
PDF created with FinePrint pdfFactory trial version www.pdffactory.com