Sony MDS-JA30ES - Manuel (Page 12)

Recording on MDs
12 EN
Playing back tracks just recorded
Do this procedure to immediately play back tracks that
have just been recorded.
Press ( immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
1 Press p again after stopping recording.
2 Press (.
Playback starts from the first track of the MD.
Recording Over Existing Tracks
Follow the procedure below to record over existing
material just as you would on an analog cassette tape.
OFF REC PLAY
0 10
TIMER
PHONES PHONE LEVEL
POWER
§
g
0
– +
• •
•
• •
•
• •
INPUT
NO
EDIT/
PUSH ENTER
OPEN/CLOSE REC
REC LEVEL
R L
≠ AMS ± DIGITAL YES
OPT1 FILTER
OPT2 COAX ANALOG • • • •
PLAY MODE REPEAT
DISPLAY/ CHAR SCROLL/ CLOCK SET
TIME ( P p r
0 )
5
0 1
3
9
7 4 6
2 8
10
•
•
•
•
•
•
•
• • •
ANALOG
≠ AMS ±
1
Do Steps 1 to 4 in “Recording on an MD” on page
8.
2
Turn AMS (or press = or +) until the
number of the track to be recorded over appears.
3 To record from the start of the track, continue
from Step 5 in “Recording on an MD” on page 9.
z
While “TR” flashes in the display
The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.
z
To record from the middle of the track
1 After Step 2 above, press ( to start playback.
2 Press P where you want to start recording.
3 Continue from Step 5 in “Recording on an MD” on
page 9.
Note
You cannot record from the middle of an existing track when
the “PROGRAM” or “SHUFFLE” is on.