Intel EXPRESS 550T - Manuel (Page 82)

72
C H A P T E R 4 Advanced Configuration
72
Adding a routing link To add a routing link to a VLAN that is not already configured:
1 Select VLAN/Routing Setup>Add .
2 Select the Setup an IP routing interface box.
3 Click Next , and follow the instructions in the Wizard windows.
Changing IP and IPX
details To change the routing protocol details for an existing VLAN:
1 Select VLAN/Routing Setup .
2 Click Routing .
3 Select the Use IP routing or Use IPX routing box to
make active (if possible).
4 Double-click the required field, type the new value and select
the correct protocol parameters.
5 Click OK .
Adding a static route A static route is a permanent entry in the routing table and is a path to
IP network which is not announced by the RIP. A static route is an-
nounced to other switches or stacks using RIP. To add a static route:
1 Select VLAN/Routing Setup .
2 Click Advanced>IP Routing
3 Click Add
4 Double-click the required field, and type the new value.
5 Click OK .
500.book Page 72 Thursday, September 2, 1999 1:50 PM