Maytag W10338688B - Manuel (Page 9)

9
9.
Select cycle modifiers
Once you select a cycle, the default settings for that cycle will be
lit. Press the cycle modifiers buttons to change the Temperature,
Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your garments.
11.
Select START/Pause/Unlock to
begin wash cycle
Press START/Pause/Unlock button to start the wash cycle.
Filling is delayed for several minutes while load balance is
sensed. When the cycle has finished, the DONE indicator will
light and the end of cycle signal will sound (if set). Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump out.
Delay in water fill
Fillling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
10.
Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Prewash or Extra Rinse. These can be
turned off, if desired.
NOTE: Not all options are available with all cycles.
Wash Temp
Hot
Some cold water is added to save
energy. This may be cooler than your
hot water heater setting.
Warm
Some cold water will be added,
so this may be cooler than what your
previous washer provided.
Cool
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added
to assist in soil removal
and to help dissolve detergents.
Tap Cold
This is the temperature from
your faucet.
Dark colors that
bleed or fade
Light soils
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils