Fisher & Paykel Ecosmart GWL11 - Manuel (Page 28)

28
Changing Pre-Set Options
Out of Balance Recovery Routine
When your Ecosmart is spinning it can sense if the wash load is out of balance and will stop
and re-try spinning up to 3 times. If the machine still senses an unbalanced load there are two
options the machine offers.
Automatic Recovery Option:
Your Ecosmart will try to automatically
correct the out of balance load. It will fill with
water and agitate to redistribute the load
before trying to spin up again.
Machine Stops Option:
Your Ecosmart will stop, giving a short burst
of beeps every five seconds and the RINSE
or SPIN light will flash. You must redistribute
the load more evenly yourself. (Use this
option if you wish to conserve water.)
1. Enter the Option Adjustment Mode.
2. Use the REGULAR button to select the Out
of Balance Recovery Option you prefer.
3. Press Power to store your selection.
Auto Water Fill Level
If you are not satisfied with the level that your
Ecosmart fills to on AUTO WATER LEVEL, you
can alter the fill level that Auto will select.
If you feel there is too much water, you can
decrease the fill level that will be selected.
1. Enter the Option Adjustment Mode.
2. Use the CYCLE buttons to decrease the
amount of water selected.
3. Press POWER to store your selection.
If you feel that there is not enough water for the load, we recommend that you check by
pausing the machine and pushing the clothes down to see how much spare water is at the
bottom of the wash basket. Clothes often float and your Ecosmart can sense the water under
the clothes. Failing this, you might like to select a higher water level manually.
Auto Water Level Adjustment
Light on
FAVOURITE = less water
PERM. PRESS = less water
WOOL = less water
DELICATE = less water
HEAVY DUTY = factory setting
Out of Balance Recovery Options
Regular
Light on = automatic recovery
Light off = machine stops