Husqvarna 580 R - Manuel (Page 17)

GB - 17
CHECK ENGINE COOLING
Engine is air cooled. Air must circulate freely
around engine from Air Intake to cooling fins
on cylinder head and block to prevent
overheating.
Every 100 hours of operation or yearly (more
often if conditions require) remove cooling
shrouds and clean cooling fins. Clean external
surfaces of engine of dust, dirt and oil deposits
which can contribute to improper cooling.
IMPORTANT: DO NOT operate engine with
blower housing removed or engine
overheating damage will result.
CHECK MUFFLER
Check muffler for cracks, wear, or other
damage. Worn out mufflers should be
replaced immediately. Continued use could
result in fire or explosion.
1. Oil Fill Cap & Dipstick
2. Air Cleaner
3. Spark Plug & Wire 4. Fuel Cap & Tank
Robin
Briggs & Stratton Intek OHV
OM0550 OM0570
1
2
3
4
1
2
3
4
Figure 13
WARNING: HOT SURFACES can
cause death or serious injury. DO
NOT TOUCH parts which are hot
from operation. ALWAYS allow parts
to cool.