Hunter Fan 37203 - Manuel (Page 6)

43000-01 06/02/2006 © 2006 Hunter Fan Company 6
5. Replace the Tank Cap by screwing it clockwise
onto the Water Tank. Make sure that the tank
cap is properly seated before screwing it back
onto the tank to ensure a proper seal.
6. Place the Water Tank back onto the Base.
Make sure the Water Tank is properly seated
on the Base or the humidifier will not work
properly.
HUNTER WILL NOT ACCEPT RESPONSIBILITY
FOR DAMAGE DUE TO WATER SPILLAGE.
7. Make sure the Power Button is set to OFF and
plug the humidifier into the wall outlet.
CAUTION: Never plug in the humidifier
while your hands are wet, as electric shock
could occur.
NOTE: Let the humidifier sit for one minute after
refilling the tank, before turning the power back
ON.
8. Push the Power Button to turn the humidifier
ON. Adjust the setting as needed.
1. When the water level is low, push the POWER
button to turn the humidifier OFF and unplug
the humidifier.
NOTE: When the tank level is too low, the
humidifier will turn OFF and display a red light.
2. Lift the Water Tank and take it to the sink or a
tub to refill.
3. Turn the Water Tank over and unscrew the
Tank Cap by twisting it counterclockwise.
4. Empty the Water Tank and refill it with fresh,
cool water. NEVER USE HOT WATER.
Base
Water
Tank
Refilling The Water Tank
Low Water Level
Light (Red)
43000_WM MechHum_06.02.06.indd 6/2/06, 11:15 AM 6