Hamilton Beach CPM700 - Manuel (Page 4)

4
Before You Begin
Electrical Requirements
Observe all governing
codes and ordinances.
A grounded, 3-prong 120
volt, 60 Hz, AC only, 15-
amp, fused electrical supply
is required. (A time-delay fuse is recommend-
ed.) It is recommended that a separate circuit
serving only this appliance be provided.
Setting up the base:
Always keep the appliance unplugged
during assembly and disassembly.
1. Check to make sure all parts for your
model are included, the machine
operates correctly, and that nothing
was damaged in shipping. Refer to
pages 5 and 6 for a list of included
parts. If anything is missing or
damaged, contact your machine
supplier immediately.
2. Place the base on a dry, sturdy, level
surface at a comfortable working
height, near a grounded 3 prong outlet.
3. Depending on the desired mixing task,
follow the instructions for selecting and
installing the appropriate attachments.
w WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Preparing for use:
Always keep the appliance unplugged
during assembly and disassembly.
1. Wash all parts except for the base in
hot, soapy water. Rinse thoroughly
and dry.
2. Wipe the machine base with a
damp cloth.
64384ENv04 11/9/01 11:10 AM Page 4