Harbor Freight Tools 94748 - Manuel (Page 9)

SKU 94748 for technical questions, please call 1-800-444-3353 PAGE 9
uNpAcKiNg
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
pRODucT fEATuRES
figuRE E
pOwER cORD/pLug
(15)
LEVER
(39)
pOwER SwiTcH
(27)
LOcK BuTTON
(14)
SpEED ADjuSTER
(56)
LOcK KNOB
(55)
fRONT HANDLE
(31)
ADjuSTiNg
KNOB
(54)
VAcuum BAg
(65)
SANDiNg BELT
(66)
power Switch (27): The two-finger Power Switch is a simple “ON/OFF” switch that
when pressed and held turns on the Belt Sander. To turn off the Sander, release
pressure on the Power Switch and the switch will automatically return up to its “OFF”
position.
(See figure E.)
Lock Button (14): The Belt Sander features a Lock Button that allows continu-
ous operation without constantly holding the Power Switch (27). To lock the Power
Switch to its “ON” position, squeeze the Power Switch, depress the Lock Button,
and release the Power Switch. To unlock the Power Switch, squeeze the Power
Switch, and then release the Power Switch without depressing the Lock Button.
(See figure E.)
power cord/plug (15): The Power Cord/Plug must only be connected to a 120
volt, grounded, electrical outlet. Do not pull on the Cord to remove the Plug from
its electrical outlet.
(See figure E.)
1.
2.
3.