Grounding – Harbor Freight Tools 94748 Manuel d'utilisation

Page 6

Advertising
background image

SKU 94748

for technical questions, please call 1-800-444-3353

PAGE 6

wARNiNg! Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities, contain chemicals known (to the State of Califor-
nia) to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks and
cement or other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)

wARNiNg! People with pacemakers should consult their physician(s) before

using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.

Exposure to aluminum oxide (a dust generated from material removing pro-
cesses) can result in eye, skin and breathing irritation.
Always use a NIOSH-
approved respirator and safety goggles. Avoid skin exposure. Proper ventilation of
the work area is required.

wARNiNg! The warnings and cautions discussed in this manual cannot cover

all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.

SAVE THESE iNSTRucTiONS

gROuNDiNg

wARNiNg!

improperly connecting the grounding wire can result in the risk of electric shock.
check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. if damaged, have it repaired by a service facil-
ity before use. if the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.

gROuNDED TOOLS: TOOLS wiTH THREE pRONg pLugS

Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low

15.

16.

17.

18.

1.

Advertising