Harbor Freight Tools 92623 - Manuel (Page 2)

English
Page 2
SKU 92623 For technical questions, please call 1-800-444-3353
SPECIFICATIONS
Item Description
Power Requirement 120 VAC, 10 amps (input), 60 Hz
Speed 200 to 3377 RPM; Variable
Disc Size 7 inches
Spindle Size 5/8 inches – 11 TPI
Line Cord 6 feet; Two-prong polarized plug
Weight 6.6 lbs.
Accessories 2 – Sanding Disks: 60 and 240 grit
1 – Foam Pad
1 – Terry Towel
1 – Polishing Bonnet
1 – Polishing Pad
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTION
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
E194601