Hotpoint PC25357 - Manuel (Page 7)

7
INSERTING THE BEATERS AND DOUGH HOOKS
Be sure the unit is unplugged before inserting beaters or dough hooks.
Please note that the dough hooks and beaters are designed to fit in the mixer
only one way. Firmly grasp the mixer by the handle. Insert the dough hook
or beater with the shaft ring into the left opening (see fig 1). Push the dough
hook or beater in as far as it will go. The dough hook or beater will click
as it locks into place. Repeat this process with other dough hook or beater.
Plug the mixer into a 120V 60Hz AC only outlet.
Your mixer is now ready to use.
NOTE: You may experience some difficulty inserting the second beater or dough hook after you
have placed one of the beaters or dough hooks into an opening. If the second beater or dough
hook does not fit, or does not lock into place, remove the beater or dough hook, turn slightly and
re-insert. Repeat this process until the dough hook or beater is properly locked into place.
NOTE: Do not press the beater eject button while inserting the beaters or dough hooks.
WARNING: Do not use excessive force while inserting
the beaters or dough hooks.
REMOVING BEATERS AND DOUGH HOOKS
Your hand mixer has a beater eject button to allow easy removal of the beaters and dough hooks.
BE SURE THE UNIT IS UNPLUGGED BEFORE REMOVING THE BEATERS OR DOUGH HOOKS.
With one hand holding the beaters or dough hooks, press the beater eject button. The beaters will
drop out of their locks for easy cleaning.
fig. 1
PC25357 HAND MIXER U&C_07.indd 7 8/30/07 12:16:25 PM