Honeywell 33 Inch Indoor Portable Evaporative Air Cooler Instruction Manual - Manuel (Page 3)

2
COOL
SWING POWER
SPEED
HIGH E
LOW
TIMER
1HR
2HR 4HR
8HR MODE
NATURAL
NORMAL
SLEEP
USE & OPERATION
EN
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.
After a few seconds the speed will switch to low. To turn the unit off, press the button again.
MODE
Press the MODE button to select your desired wind type: NORMAL - NATURAL - SLEEP.
SPEED
Press the SPEED button repeatedly to change the speed between High - Med - Low.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 8
hours of use.
NORMAL
NATURAL
SLEEP You can select either High, Medium or Low fan speeds.
The fan speed alternates between High, Medium, Low and Off to mimic a natural breeze.
This mode is for comfort during the night. When the SLEEP mode is selected, the airflow
will randomly vary between High, Medium and Low. :
:
: