Samsung HW-Q910B 520W 9.1.2-Channel Soundbar System - Manuel (Page 28)

ENG - 28
07 CONNECTING A MOBILE DEVICE
Method 1. Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on.
PAIR
5 Sec
5 Sec
OR
Top of the Soundbar
BT PAIRING
<Q910B>
Top of the Soundbar
BT PAIRING
<Q750B>
Mobile device
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 3.28 ft (1 m) distance.
1. Press the PAIR button on the Soundbar remote control to enter the “ BT PAIRING ” mode.
(OR) a. Press the (Multi Function) / (Source) button on the top panel and then select “ BT ”.
“ BT ” changes to “ BT PAIRING ” in a few seconds automatically or changes to “ BT READY ” if there is a connect record.
b. When “ BT READY ” appears, press and hold the (Mic On/Off) / (Source) button on the top panel of the Soundbar for more than 5
seconds to display “ BT PAIRING ”.
2. On your device, select “ Soundbar Q***B ” from the list that appears.
• When the Soundbar is connected to the Mobile device, [ Mobile Device Name ] → “ BT ” appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the “ BT READY ” mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., “ Soundbar Q***B ”) in the list of speakers on the Mobile device, delete it.
• Repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the (Mic On/Off) / (Source) button on the top of the
Soundbar for more than 5 seconds while the Soundbar is in “ BT ” mode.)