Samsung HW-Q910B 520W 9.1.2-Channel Soundbar System - Manuel (Page 10)

ENG - 10
7
Sound Control
By pressing the button, you can set the audio function such as Spacefit sound , AVA , Voice enhance mode , Night
mode , Sync , Virtual . The desired item can be adjusted using the Up / Down buttons.
• The Spacefit sound and AVA functions are not supported by Q750B model.
• Voice enhance mode enhances spoken dialog in movies and TV to make it easier to hear.
• Night mode is optimized for night time viewing with the settings adjusted to bring the volume down but keep
the dialog clear.
• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band.
150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left / Right buttons and each
can be adjusted to a setting between -6 to +6 using the Up / Down buttons.
(Make sure the Sound mode is set to “ Standard ”.)
• If the video on the TV and audio from the Soundbar are not synchronized, select Sync in Sound Control, and
then set the audio delay between 0~300 milliseconds by using the Up / Down buttons.
• Sync is only supported for some functions.
• The Virtual Speaker function can be turned ON / OFF by using the Up / Down buttons.
8
Play / Pause
You can also play or pause music by pressing the button.
9
Up/Down/Left/
Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the previous music file.
• ID SET
Use this option when the Subwoofer or Surround Speakers are not connected or need reconnection.
While powered off, press and hold the
Up button for 5 seconds to perform ID SET . (See page 15.)
10
Info
Press to display information about the active function or the codec available.
In
BT mode, it displays the connected device (when pairing is complete) or “ BT ready ” (when pairing is required).
11
WOOFER LEVEL
Push the button up or down to adjust the level of the woofer (bass).
12
VOLUME
Push the button up or down to adjust the volume.
• Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
13
TONE CONTROL
By pressing the button, you can adjust the volume of the treble or bass sound. The defired item can be adjusted
using the Up / Down buttons. This function is enabled in Sound mode excluding in Standard mode.
• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust
the volume between -6~+6 by using the Up / Down buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.