Set” button, 1 short press, 1 long press – DE DIETRICH DVI360 Manuel d'utilisation
Page 25
47
GB
46
GB
Occasionally: options, settings
Options / Settings / Information
Cancelling a programme
Hold down the Start button for a few seconds: the
programme light will go out and you can then re-
programme.
Forced air drying
Your machine is set at the factory for the air drying
system to run for 5 hours.
Pressing the “ “ button re-activates the air drying
system for 5 minutes every hour until the door is
opened.
This will ensure that your washing up and your tub
are perfectly dry.
Take care not to place anything in front of the door
(bags, towels) that may block the ventilation grill.
This programme makes savings by auto-
matically detecting the amount of
washing up and how dirty it is.
Regenerating
salt
Rinse aid
flashing
The setting is confirmed automatically after 10 seconds without pressing
the “Menu” button or by pressing the “SET” button again.
Checking the water softener’s
setting:
Press the Programmes button to change
the setting.
Setting the time:
When the machine is switched on the
current time reads
. Press the
Programmes button until you have the
hour setting you desire.
Press the Programmes button to set the
minutes.
Releasing the regenerating salt
and rinsing agent:
If you are using “2-in-1” or “3-in-1” prod-
ucts, you can cancel display of the salt
and rinsing agent symbols.
Press the Programmes button: the
“Level”
symbol disappears. Repeat the
operation if you wish to see the symbols
displayed.
1 short press
1 short press
1 short press
“SET”
button
1 long press