SONOSAX SX42 - Manuel (Page 24)

5.1.3
Sorties principales
Main output type: floating balanced, transformerless
Main output impedance: <50
Ω
Nominal output level: +6dBu (internally adjustable from 0dBu to +15dBu),
-40dBu with the line attenuator switched ON
Maximum output level: +20dBu @600
Ω
Sub output type: unbalanced
Sub output level: +6dBu (internally adjustable from 0dBu to +15dBu)
Phones level control: 6dB/step
Headphones output level: 0dBu in position 3, +11dBu@75
Ω and max. +13dBu @150Ω,
(internally adjustable from -2dBu to +12dBu)
1to4 direct output type: unbalanced
1to4 direct output level: +6dBu (internally adjustable from -5dBu to +11dBu)
Limiters level: +6dBu (internally adjustable from -5dBu to +11dBu)
Internal oscillator: 1 kHz with THD <1%
Slate microphone: electret with automatic level control
Led level indicators: RED: 6dB before clipping, GREEN: when limiter is active
5.1.4
Egaliseur (en option)
Low frequencies filter: 4 dB/octave, ±12dB at 80 Hz, ±15dB at 40 Hz
High frequencies filter: 4 dB/octave, ±12dB at 8 kHz, ±15dB at 16 kHz
Mid sweep filter: 6 dB/octave, ±11dB 180 Hz to 8 kHz
5.1.5 Alimentation
Supply voltage: 6V DC provided by four LR20 (D) cells or four LR6 (AA) cells
with size adaptors. You can use standard 1.5V alkaline
batteries, 1.2V 4Ah NiCd or 1.2V 7Ah NiMH accumulators
External power: 6V to 12V DC, 1A peak, 500mA average
Autonomy: approx. 16h with four LR20 (D) alkaline batteries,
approx. 12h with four LR20 (D) NiMH accumulators,
approx. 4h with four LR6 (AA) NiMH accumulators
5.1.6 Dimensions et poids
Dimensions (H*W*D): 266mm x 160mm x 50mm (10.48’’ x 6.3’’ x 1.97’’)
Net weight (without batt.): 1.65 kg (3.64 lbs)
Weight with batteries: 1.8 kg (3.95 lbs) with four AA batteries & size adaptors
2.2 kg (4.85 lbs) with four alkaline D-cells (LR20)
Mode d’emploi SX42 Page 24 de 27