Radson Vido Getting started - Manuel (Page 3)

3
Power On/Off function :
Using the and keys tab across to to allow you to turn the unit on or off, then
press (OK) to confirm.
Function Adjustment Description Availability
Easy Full
Control operation Setup
The unit must be programed for operation
in heating only, cooling only or heating
and cooling.
Control operation Setup
Scroll to the Fixed Fan mode , and
then press on the ( ) key. Use (+) or (-)
keys to choose from the following:
Nod (Mode) Hot for heating.
Nod (Mode) CoLd for cooling.
Nod (Mode) AUto for heating and cooling.
Press (OK) to confirm.
Fixed Fan Setting
F1, F2, F3 gives fan speed 1,2 or 3 respec–
tively with no temperature control. A1,
A2, A3 gives fan speed 1,2 or 3 respec–
tively in heating only if the water
temperature ≥32°C.
Use (+) or (-) to select and press (OK) to
confirm.
(Note the fan speed symbol will only
appear when the fan is running).
Comfort Setting
Provides room temperature control with
automatic fan speed adjustment accor-
ding to difference between actual and
set temperature. The fan operates when
water ≥32°C in heating or ≤15°C cooling.
Press (OK) to view the set temperature.
Use (+) or (-) to adjust the required room
temperature. Default setting is 21°C in
Heating.
Automatic Setting
The unit will run according to one of the
9 preset timed programs, or one of the 4
user defined programs.
See section 12.5 for program options
and setup.
Press (OK) to view the actual set
temperature (Comfort or Set-back).
Night Set-back Setting
Provides room temperature control
with automatic fan speed adjustment
according to difference between actual
and night set-back temperature.
Press (OK) to view the set temperature.
Use (+) or (-) to adjust the required room
temperature. Default setting is 19°C in
Heating.
Holiday Setting
Provides frost protection or overheat
protection during periods of absence
(holiday). The control will count down
the time to “00” after which control is
resumed in Auto setting. For frost
protection the set temperature is 7°C.
For overheat the set temperature is 30°C.
Select and is displayed.
Use the (+) and (-) to adjust the duration.
(In hours “H” if below 24H and then in
days “d”).
Use the (-) key to interrupt this period and
adjust the duration on “no”.
Power on/off
Turns unit on/off.
Press (OK) to turn the power on or off.
Set Clock Menu
Displays time in 12h or 24h format.
Press (OK)
Use the (+) and (-) keys to set the minutes.
Press (OK)
Use the (+) and (-) keys to set the hours.
Press (OK)
Use the (+) and (-) to set the days.
Press (OK).
Program Menu
Provides choice from 9 pre-programed
and 4 user defined timed programs.
Please refer to section 12.5 in
your Installation Manual for more
information.
x
x x
x x
x
x
x
x x
x x
x
Auto
P
4.0 Functions
UK