Maytag MEW7527AS - Manuel (Page 6)

6
3. Press KITCHEN TIMER to start the timer. The time begins
counting down. “TIMER Started” will scroll down the text
display area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.
4. Press KITCHEN TIMER to clear the display.
NOTE: A reminder beep will sound until the Timer is
canceled.
To Cancel:
Press KITCHEN TIMER.
Settings
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
“TEMP UNIT” will appear in the text area. “FAHRENHEIT.
Press 1 for Celsius” will scroll in the text area.
2. Press the “1” number keypad to change the temperature unit
setting.
3. “CELSIUS Selected” will scroll in the text area. The
temperature units have been changed.
4. Press SETTINGS then follow the display prompts to return to
Fahrenheit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid pad press
■ Function has been entered
■ Oven is preheated
Three tones
■ Invalid pad press
Four tones
■ End of cycle
■ End of Kitchen Timer
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS twice. “SOUND” will appear in the text area,
and “ON. Press 1 for OFF” will scroll in the text area.
2. Press the “1” number keypad to turn the sound Off.
3. “OFF Selected” will scroll in the text area. The sound has now
been turned off.
4. Press SETTINGS twice then follow the display prompts to
return the sound setting to On.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS three times. “SOUND VOLUME” will appear
in the text area, and “HIGH. Press 1 for LOW” will scroll in the
text area.
2. Press the “1” number keypad to turn the sound Low.
3. “Low Selected” will scroll in the text area. The sound volume
has now been changed.
4. Press SETTINGS three times then follow the display prompts
to return the sound volume setting to High.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS four times. “END TONE” will appear in the
text area, and “ON. Press 1 for OFF” will scroll in the text
area.
2. Press the “1” number keypad to turn the end tone Off.
3. “OFF Selected” will scroll in the text area. The end tone has
now been turned off.
4. Press SETTINGS four times then follow the display prompts
to return the tone setting to On.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS five times. “KEYPRESS TONE” will appear
in the text area, and “ON. Press 1 for OFF” will scroll in the
text area.
2. Press the “1” number keypad to turn the keypress tone Off.
3. “OFF Selected” will scroll in the text area. The keypress tone
has now been turned off.
4. Press SETTINGS five times then follow the display prompts to
return the keypress tone setting to On.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS six times. “REMINDER TONE” will appear in
the text area, and “ON. Press 1 for OFF” will scroll in the text
area.
2. Press the “1” number keypad to turn the reminder tone Off.
3. “OFF Selected” will scroll in the text area. The reminder tone
has now been turned off.
4. Press SETTINGS six times then follow the display prompts to
return the reminder tone setting to On.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS seven times. “12/24 HOUR” and “12HR.
Press 1 for 24HR” will appear in the display text area.
2. Press the “1” number keypad to change the 12/24 hour
setting to 24-hour.
3. “24HR Selected” will scroll in the text area. The 12/24 hour
setting has been changed.
4. Press SETTINGS seven times then follow the display prompts
to return the clock setting to 12-hour.