Maytag MEDC200XW - Manuel (Page 8)

8
6.
Press PUSH TO START to begin cycle
Push and hold the PUSH TO START knob to begin the cycle.
4.
Set temperature (on some models)
Select temperature by turning the knob to the desired position or
select the Automatic Dry Cycle that has the temperature included
in the cycle selections.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE / Fabric
Turn the TEMPERATURE / Fabric knob to change the drying
temperature setting. See “Setting the Drying Temperature”.
3.
Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide for
more information about each cycle.
SENSOR DRY/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your load,
by turning the knob to dryness level.
Selecting Very or More Dry, Energy Preferred, or Less Dry
automatically adjusts the dryness level of the fabrics at which
the dryer will shut off.
SENSOR DRY/AUTOMATIC DRY cycles give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting. Choose Energy Preferred for optimal
energy savings. Less Dry removes less moisture and is used for
loads you may want to put on a hanger to complete drying.
Very or More Dry removes more load moisture. Energy Preferred
is used for a starting point for SENSOR DRY/AUTOMATIC DRY
cycles.
5.
Select End of Cycle Signal (if desired)
Turn the END OF CYCLE SIGNAL knob to select the desired
setting (On or Off). The End of Cycle Signal produces an audible
sound when the drying cycle is finished. Promptly removing
clothes at the end of the cycle reduces wrinkling.
DRYING RACK
To purchase a drying rack for your dryer, please refer to
“Assistance or Service” on the back cover of the manual or
contact the dealer from whom you purchased your dryer.
Part Number Accessory
3406839 Drying rack - fits 29" Super Capacity Plus