Maytag WGD4890XQ - Manuel (Page 8)

8
6.
Press PUSH to START to
begin cycle
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.
4.
Set cycle settings and options
Select cycle settings and options by turning the knob to the
desired position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE / Fabric
Turn the TEMPERATURE / Fabric knob to change the drying
temperature setting. See “Setting the Drying Temperature”.
Wrinkle Shield™ feature (on some models)
n Get up to 40 minutes of heat-free, periodic tumbling at the
end of a cycle. Turn the WRINKLE SHIELD™ knob to select
ON or OFF at any time before the cycle has ended.
3.
Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
ACCUDRY™/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Very Dry, ENERGY PREFERRED, or Less Dry
automatically adjusts the dryness level at which the dryer will
shut off. Once a dry level is set, it cannot be changed without
stopping the cycle.
ACCUDRY™/AUTOMATIC DRY cycles give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Very Dry removes more load moisture. ENERGY
PREFERRED is used for a starting point for ACCUDRY™
cycles. Choose ENERGY PREFERRED for optimal energy
savings. Less Dry removes less moisture and used for loads
you may want to put on a hanger to complete drying.
ENERGY PREFERRED
ACCUDRY
sensor dryer
WRINKLE
SHIELD
OFF
Jeans
OFF
OFF
Very Dry
Damp
Dry
Tumble
Press
Cool Down
Less Dry
20
40
50
60
70
Delicate
Cool Down
Heavy
Dry
TIMED
DRY
WP_WEGD4900XW
TEMPERATURE
fabric
no
he
at
kn
its casua
l
he
av
y
A
ir
O
nl
y
L
ow
Mediu
m
H
ig
h
PUSH TO START
Off
On En
d of
Cycle Sign
al
5.
Select End of Cycle Signal
(if desired)
Turn the END OF CYCLE SIGNAL knob to select the
desired setting (On or Off). The End of Cycle Signal produces
an audible sound when the drying cycle is finished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield™ setting is selected
and the End of Cycle Signal is on, the tone will sound every
5 minutes until the clothes are removed, or the Wrinkle
Shield™ setting ends.
O
ff
On
WRINKLE SHIELD
PUSH TO START
Off
On En
d of
Cycle Sign
al