Cycle guide — timed cycles, Cycle guide — steam cycle (on some models), Adjusting drying time on timed cycles – Maytag MED4200BG Manuel d'utilisation

Page 9: Selecting the drying temperature

Advertising
background image

9

CYCLE GUIDE — TIMED CYCLES

Any load

Timed Dry

High

(the last

Wrinkle Prevent

Use to dry items to a damp level for items that do

NOTE: Select Air

Medium

timed dry

not require an entire drying cycle. Select a drying

Only to dry foam,

Low

time set)

temperature based on the type of fabrics in your

rubber, plastic, or

Extra Low

load. If you are unsure of the temperature to select

heat-sensitive

Air Only

for a load, select the lower setting rather than the

fabrics.

higher setting.

Small loads and

Rapid Dry

High 18

Wrinkle Prevent

For small loads of 3–4 items.

sportswear

Medium

Low

Extra Low

Air Only

Small loads and

Air Dry

18 For small loads of 3–4 items.

sportswear

Items to dry:

Cycle:

Drying

Temperature:

Default

Time:

Available

Options:

Cycle Details:

Settings and options shown in bold are default settings for that cycle.

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

CYCLE GUIDE — STEAM CYCLE (on some models)

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Load Size Recommendations
For best results, follow the load size recommendations noted

for each cycle.

Small load: Fill the dryer drum with 3–4 items, not more than

1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.

Large load: Fill the dryer drum up to about 3/4 full.

Do not overload. Items need to tumble freely.

Shirts, blouses,

Refresh

High 15

Wrinkle Prevent

Use to reduce light wrinkles from loads left in the

and slacks

dryer too long. Do not add dryer sheets.

Items

to refresh:

Cycle:

Drying

Temperature:

Default

Time:

Available

Options:

Cycle Details:

Adjusting drying time on Timed Cycles

When you select a Timed

Cycle, the default time appears

in the display. Use + and – to

increase or decrease the time

in 1-minute increments. Touch

and hold to change the time

in 5-minute increments.
The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such

as towels and work clothes.
A Low to Medium heat setting may be used for drying

medium-weight items such as sheets, blouses, dresses,

underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic,

or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various

loads, refer to the care label directions.

Advertising
Ce manuel est liée aux produits suivants: