Maytag MEDP475EW - Manuel (Page 6)

6
Not all cycles and settings are available on all models.
SENSOR CYCLES - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry: Cycle: Temp: Cycle Details:
Jeans, heavy work clothes,
towels
Jeans
Energy Preferred
Less Dry
High
Medium
Low
Gives fabric the best drying in the shortest time. Drying time varies based
on fabric type, load size, and dryness setting.
Select a drying temperature based on the fabrics in your load. If you are
unsure of the temperature to select for a load, select the lower setting
rather than the higher setting.
CYCLE GUIDE — SENSOR CYCLES
CYCLE GUIDE — TIMED DRY
Items to dry: Cycle: Drying
Temperature:
Cycle Details:
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle knob or
be a separate control.
Work clothes, medium weight
fabrics, sheets
Casual, shirts, pants,
lightweight items, synthetics,
delicates, athletic wear
Any load Wrinkle Prevent No Heat After a cycle is complete, the load is periodically tumbled to avoid
wrinkles until you are ready to remove it.
These settings are added at the end of certain cycles to reduce wrinkling. SPECIAL SETTINGS:
Any load
Rubber, plastic, heat
sensitive fabrics
Timed Dry
Timed Dry No Heat
Dries items to a damp level for items that do not require an entire
drying cycle.
Select a drying temperature based on the fabrics in your load. If
you are unsure of the temperature to select for a load, select the
lower setting rather than the higher setting.
Use a no heat setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Any
Heavy or bulky items Heavy Dry Completes drying if items are still damp. Any