Maytag MVWB835DW Installation - Manuel (Page 8)

8
COMPLETE INSTALLATION
CHECKLIST
q Check electrical requirements. Be sure you have correct
electrical supply and recommended grounding method.
q Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
q Check that you have all of your tools.
q Check that shipping materials were completely
removed from washer.
q Check that water faucets are on.
q Check for leaks around faucets and inlet hoses.
q Remove protective film from console and any tape
remaining on washer.
q Check that washer is plugged into a grounded
3 prong outlet.
q Dispose of/recycle all packaging materials.
q Read “Washer Care” in your Use and Care Guide.
q To test and clean your washer, measure 1/2 of normal
recommended amount of powdered or liquid detergent
and pour it into washer basket or detergent dispenser
(on some models). Close lid. Select any cycle. Start washer
and allow to complete full cycle.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
16.
Plug into a grounded 3 prong outlet