Denon AVR-684 - Manuel (Page 43)

43
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1 Select the input source.
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 25).
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or DTS.
2 Select the Dolby/DTS Surround mode.
(Remote control unit)
3
Play a program source with the , mark.
• The Dolby Digital indicator lights when
playing Dolby Digital sources.
DIGITAL
Light
2 3
1 1 3
4, 5, 6, 7, 8, 9, 10
3
5, 6, 7, 8, 9, 10 5, 6, 7, 8, 9, 10
5, 6, 7, 8, 9, 10
1
1
11
2
Playback with a digital input
• The DTS indicator lights when playing
DTS sources. Light
4 Set the surround parameter according to the source.
First, press the SURROUND PARAMETER button.
(Remote control unit)
NOTE:
Please make sure the “AUDIO” position of the slide switch
on the remote control unit.
Example: DVD
(Main unit) (Remote control unit)
(Main unit)
Operate the SURROUND BACK button to switch Surround
Back CH ON/OFF.
(Remote control unit) (Main unit)
• Lights when the Surround Back CH is
on. Light