Denon DRA-685 - Manuel (Page 9)

9
ENGLISH
(L) (R) (L) (R)
R L R L
R L
R L
R L R L
+
-
+
-
SPEAKER SYSTEMS
IMPEDANCE A or B : 4 16 A + B : 8 16
VIDEO
PRE OUT
MAIN IN
B A SWITCHED
TOTAL 120W(1A.) MAX.
120V 60Hz
AC OUTLETS
AUDIO
AUDIO OUT
IN
OUT
IN
OUT
IN
DVD /
VDP
VCR
MULTI
SOURCE
MULTI
SOURCE
ANTENNA
V.AUX
MONITOR
PHONO
CD
V.AUX
VCR
DVD /
VDP
TAPE
VCR VCR
TAPE
ROOM TO ROOM
(REMOTE CONTROL)
SIGNAL
GND
LOOP
ANT.
AM
FM
COAX.
75
Speaker system connections
• Connect the speaker terminals with the speakers making sure that
like polarities are matched (< with <, > with >). Mismatching of
polarities will result in weak central sound, unclear orientation of
the various instruments, and the sense of direction of the stereo
being impaired.
• When making connections, take care that none of the individual
conductors of the speaker cord come in contact with adjacent
terminals, with other speaker cord conductors, or with the rear
panel.
Speaker Impedance
• When speaker systems A and B are use separately, speakers with
an impedance of 4 to 16 Ω /ohms can be connected for use as
speakers.
• Be careful when using two pairs of speakers (A + B) at the same
time, since use of speakers with an impedance of 8 to 16
Ω
/ohms.
• The protector circuit may be activated if the set is played for long
periods of time at high volumes when speakers with an
impedance lower than the specified impedance are connected.
Connecting the speaker terminals
1. Loosen by turning
counterclockwise.
2. Insert the cord. 3. Tighten by turning
clockwise.