Save these instructions, Important safeguards – Deni Buffet Server 15130 Manuel d'utilisation

Page 2

Advertising
background image

1

®

Allow to cool before putting on or taking off parts.

Always clean each part individually.

Do not use outdoors.

Do not use the Deni Buffet Server for other than intended
use.

Do not clean with metal scrubbing pads. Pieces can break
off the pad and short circuit the electrical parts, creating
the possibility of an electrical shock.

To protect against electrical shock, do not immerse plug,
cord, or motor base in water or any other liquids.

It is recommended that you do not use an extension cord
with this unit. However, if one is used, it must have a
rating equal to or exceeding the rating of the appliance.

DO NOT leave this appliance unattended while in
operation.

Do not fill trays more than

2

/

3

full.

This unit is for household use only.

This appliance is supplied with a molded 3 prong
grounding-type plug and should be used in combination
with a properly connected grounding-type outlet. If a
grounding-type outlet is not available, an adapter may be
obtained so that a 2 slot wall outlet can be used with a 3
prong plug. The adapter must be grounded by attaching its
grounding lug under the screw of the outlet cover plate.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using this electrical appliance, safety
precautions should always be observed, including
the following:

READ ALL OF THE INSTRUCTIONS.

Close adult supervision must be provided when this
appliance is used by or near children.

Using attachments not recommended or sold by
Keystone Manufacturing Co., Inc. may cause hazards.

DO NOT allow the cord to hang over the edge of the
counter or touch hot surfaces.

Place the Deni Buffet Server securely in the center of the
counter or work space.

Do not place near hot gas or electric burner.

Do not touch hot surfaces.

Turn the thermostat to the OFF position before plugging
in or unplugging.

To disconnect, remove plug from electrical outlet.

CAUTION: The surface will remain warm after the unit is
turned off.

Always unplug the unit before attempting to move it.
Extreme caution must be used when moving
appliances containing hot oil or other hot liquids.

DO NOT operate with a damaged cord. Return the
appliance to Keystone Manufacturing Company Inc.
for proper service, replacement or repair immediately.

Always unplug before cleaning and removing parts.

Advertising