Danby DWC458BLS - Manuel (Page 5)

OPERATING INSTRUCTIONS (cont’d)
SETTING THE
TEMPERATURE IMPORTANT: In the event of a power failure, wait 3 to 5 minutesbefore restarting.
• To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the increase and decrease
temperature control buttons simultaneously for approximately five (5) seconds.
• The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine
storage requirements. Each depression of the increase or decrease temperature buttons will allow you to adjust
the temperature in 1° increments within the aforementioned range.
• You may view your ‘set’ temperature at any time by briefly depressing either the increase or decrease temp.
button. The set temperature will flash in the display area for 5 seconds before the display resumes showing the
current cabinet temperature.
WINE STORAGE IMPORTANT: Store wine in sealed bottles only.
SHELF
INSTRUCTIONS
IMPORTANT: Do not cover racks with aluminum foil or any other material that will
prevent adequate air circulation within the cabinet.
To remove a rack from its locked position, tilt the rack as shown in Fig. C and
pull outward. To re-install, ensure the rack is resting securely on the support
brackets and push the rack inward until it locks into place.
Fig. C
To achieve the maximum storage capacity of 45 (750mL) bottles,
follow these stocking instructions:
1) Stock the top 5 full width shelves with 7 bottles per shelf,
positioned as in Fig. A.
2) Stock the bottom 2 half width shelves with 5 bottles per shelf,
positioned as in Fig. B. This will give you a max. capacity of 45
bottles.
Fig. A
Fig. B
4