Velodyne vQuiet - Manuel (Page 5)

Charging headphones
Charging the vQuiet before using for the time is recommended in order to maximize battery life. Low
battery is indicated by the LED status indicator on the left ear cup displaying red .
To begin charging, connect the USB cable (micro USB end) to the port behind the right ear cup.
Connect the other end of the USB cable to any charge capable USB port or a USB-style charger. Your
vQuiet headphones will begin charging, as represented by the red LED status indicator. Once charging is
complete, the LED status indicator will shut off.
Charge time About 1.5 hours
Active Noise Cancellation (ANC) operation time Up to 35 hours
Noise cancellation
Noise cancellation is activated by the switch located on the left ear cup.
Turn the switch to the on position to activate noise cancellation (represented by the blue LED).
The Velodyne logo on the left ear cup serves as the bypass button.
Function LED Activity
Power on Blue
Power off No light
Low power Red
Charging Red (right ear cup)
Charging complete No light (right ear cup)
LED indications
How to connect
To connect your vQuiet headphones, plug the blue marked 3.5 mm (1/8”) connector into the left or right
ear cup.
Plug the unmarked 3.5 mm (1/8”) connector into the audio output port on your audio device.
vQuiet user’s guide
4