DCS DD-30SS - Manuel (Page 12)

11
INSTALLING DOWNDRAFT (continued)
13) Connect the ductwork to the Backdraft damper. Seal all joints with duct tape and vent to the
outside of the home.
14) Install the cooktop according to the cooktop manufacturer's instructions. Check to make sure
that the rear edge of the cooktop overlaps the front edge of the downdraft by 3/8".
IF THE BLOWER DOES NOT OPERATE:
1) Check that the circuit breaker is not tripped or the house fuse blown.
2) Check that the grease filters are properly installed. (See the section on Safety Microswitches
page 4 of Use and Care Guide).
3) Disconnect the power supply and check that the wiring connections have been made properly.
INSTALLATION INSTRUCTIONS