Maytag Clothes Dryer - Manuel (Page 24)

Status Indicator
You may follow the progress of your dryer with the drying Status indicator lights.
sensing estimated time |
timed wet damp cool dry wrinkle
cycle down prevent
Sensing Light
When a cycle is first turned on, the Sensing light glows until a wet item is detected.
■ In a Sensor Cycle, if a wet item has not been detected within 1 0 minutes, the Sensing light
will turn off and the dryer will shut down.
■ In a Timed Cycle, if a wet item is not detected after 1 0 minutes, the Wet light turns on and
the selected cycle continues.
Timed Cycle
The Timed Cycle and Sensing light indicators will glow during the drying cycle of a timed
cycle. After the drying time is complete, the dryer will go through a Cool Down cycle; during
this time, the Cool Down indicator will glow. After Cool Down completes,
■ If the WRINKLE PREVENT feature is selected, the Dry section of the indicator will glow.
The Wrinkle Prevent indicator will flash and the load will intermittently tumble for 120
minutes.
■ If the WRINKLE PREVENT feature is not selected, the clothing will stop tumbling and the
Dry section of the indicator will glow.
Wet
The Wet status light is illuminated whenever a wet item is detected in the dryer during a
sensor cycle.
The Wet light will remain on until:
■ The damp dry point is reached in a Sensor Cycle.
■ The dryer enters the cool down period in a Timed Cycle.
Damp
When the Damp status light glows, the load is about 80% dry. To be alerted when your load is
approximately 80% dry, you may use the Damp Dry Signal option. See "Damp Dry Signal" in
the "Optional Eeatures" section.
NOTE: The Damp indicator does not glow during timed cycles.
Cool Down
The Cool Down light glows during the cool down part of the cycle. Laundry is cooling down
for ease in handling.
Dry
The Dry light illuminates when the drying cycle is finished. This indicator stays on during
the WRINKLE PREVENT feature.
Wrinkle Prevent Feature
The Wrinkle Prevent indicator light blinks when the Wrinkle Prevent option is selected and
that part of the cycle is occurring. This cycle lasts for 120 minutes.
Select the drying cycle that matches the type of load you are drying. See Sensor Preset or
Manual Preset Cycle Settings chart.
normal
heavy
duty
bulky
items
sanitize
delicate
sensor cycles
quick dry
rapid refresh
'custom refresh
_ check lint screen
Cycle Control knob
Sensor Cycles
Sensor Cycles allow you to match the cycle to the load you are drying. See the following
Sensor Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature.
A sensor detects the moisture in the load and automatically adjusts the drying time for optimal
drying.
Sanitize
Use this cycle for items such as towels, bedding, children's clothing or other items needing to
be sanitized, this cycle is designed to eliminate 99.9% of 3 common infectious bacteria, this
cycle should be run to completion to ensure sanitization. Lor best results, do not interrupt
cycle.
NSF Protocol PI54
Sanitization Performance of
Residential clothes Dryers
Heavy Duty
Use this cycle to get High heat for heavyweight mixed loads, cotton towels or jeans.
Normal
Use this cycle to get Regular heat for drying no-iron fabrics such as sport shirts, permanent
press blends, work clothes, or sheets.
Bulky Items
Use this cycle to get Regular heat for drying large items that require very long drying times
such as jackets, comforters and pillows. Rearrange the load halfway through the dryer cycle;
this will aid the drying process.
Delicate
Use this cycle to get Medium heat to gently dry items such as washable knit fabrics or
lingerie.
24