Polarized plug, Cord release, On/off pedal – Hoover S3825 Manuel d'utilisation

Page 9: Hard floor cleaning, Suction control valve, Carpet cleaning

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Polarized Plug

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider

than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.

Cord Release

Fully unwind the

power cord. A

yellow mark on

the power cord
indicates the
recommended cord
length. Do not
exceed the cord
length beyond the
red mark.

On/off Pedal

1. Insert the plug

into the electrical

outlet.
2. Press the on/
off pedal located
on the top of the

vacuum cleaner, to

turn on the vacuum
cleaner and press
the pedal again to
turn the vacuum
cleaner off.

Carpet Cleaning

Attach the Power
Nozzle to the end

of the telescopic

wand tube. For
large carpeted areas.

Hard Floor Cleaning

For hard floor clean­
ing use the hard

floor tool for vacu­
uming hardwood,

laminate coverings,

and ceramic floors.

NOTE: When using

the Power Nozzle to
clean hard floors,
turn the agitator
“OFF” by pushing
the brushroll “ON/

OFF” button on the

hand grip as shown
in Fig. 1.6.

Suction Control Valve

To clean delicate

fabrics, slide valve
over to lower the
suction and protect
fabrics and sur­
faces.

Advertising