Installation, Changing over the door hinges, Aligning the appliance – Bosch KGN57VL20 Réfrigérateur-congélateur combiné Confort Manuel d'utilisation
Page 5
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
en
Installation
Install the appliance in a dry, well
ventilated room. The installation iocation
shouid neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a
suitable insulating plate or observe the
following minimum distances to a heat
source:
3 cm to an eiectric cooker.
30 cm to an oii or solid-fuel cooker.
Appliances with fitted handies must be
situated at ieast 55 mm from the wali on
the hinge side so that the door can be
opened by 90°.
Changing over the door
hinges
We recommend that you have the door
hinges changed over by our customer
service.
Before changing over the hinges, puli out
the mains piug or disconnect the fuse.
Attention! Carefully place the
appliance on its back.
Installation in numerical sequence. Fig. ED
Aligning the appliance
Fig.O
Place the appliance in the designated
location and align.
Adjust the height-adjustable feet with
a wrench.
If the refrigerator is to be pushed, the
height-adjustable feet at the front of the
appliance must be completely screwed
in so that the front wheels can roll. Fig. O