Aclimoiial feafaires, Wrinkle shield™ setting option, Automatic cycle modifiers – Whirlpool CABRIO W10305227B Manuel d'utilisation
Page 8: Timed cycle modifiers, Air cniy, Drum light cption, Damp dry signal option, Cycle signal option, Sensing, Eco monitor
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

AcliMoiial Feafaires
WRINKLE SHIELD™ Setting Option
High
More
Normal
Medium
Low
Cyt.lc
SiQn,l|
Less
Damp
Extra Low
AirOniy
Drum 1 ight
i:
V Loud
ISoft
^Off
. t
-T
m
Dryness Temp
Leve!
Manual
Automatic Cyctes Only
Cycles Oniy
Wrinkle
Shield
Damp Dry
Signal
Automatic Cycle Modifiers
Use the Dryness Modifier to seiect dryness ieveis for the
Automatic Cycies. Press DRYNESS LEVEL untii the desired
Dryness Levei setting iiiuminates.
Depending on your ioad, you may seiect different drying ieveis.
Press the DRYNESS LEVEL button and seiect either, More,
Normai (Defauit), Less or damp. Once the dryness ievei has been
achieved, dryer wiii automaticaiiy shut off.
NOTE: Once dryness ievei has been set, it cannot be changed
without stopping cycie and cannot be used on Manuai cycies.
Timed Cycle Modifiers
Use the Temperature Modifier to seiect temperatures for
the Timed Cycies. Press TEMP untii the desired temperature
setting iiiuminates.
NOTE: Temperature modifiers cannot be used with the Auto
Dry Cycies.
Air Cniy
Use the Air Oniy Modifier for items that require drying without heat
such as rubber, piastic and heat-sensitive fabrics. This tabie
shows exampies of items that can be dried using Air Oniy.
Type of Load
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
2 0 - 3 0
Plastic - Shower curtains, tablecloths
2 0 - 3 0
Rubber-backed rugs
4 0 - 5 0
Clefin, polypropylene, sheer nylon
1 0 - 2 0
‘Reset cycle to complete drying, if needed.
When using Air Only:
■ Check that coverings are securely stitched.
■ Shake and fluff pillows by hand periodically during the cycle.
■ Dry item compieteiy. Foam rubber piiiows are siow to dry.
NOTE: Air Oniy is not avaiiabie with Automatic Cycies.
Drum Light Cption
On some modeis, seiect Drum Light to turn on the iight inside
the dryer drum. During a cycie, if Drum Light is seiected, the
drum iight turns on and wiii remain on untii DRUM LiGHT is
pressed again, the door is opened and ciosed, or wiii turn off
after 5 minutes.
When the dryer is not running, the drum iight wiii turn on when
DRUM LiGHT is pressed or the dryer door is opened, and it wiii
remain on untii the dryer door has been open for 5 minutes, the
dryer door is ciosed or DRUM LiGHT is pressed again.
Press DRUM LiGHT at any time to turn the drum iight ON or OFF.
The WRiNKLE SHiELD"^“ setting heips keep wrinkies from forming
when you cannot unioad the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
■
Press the WRINKLE SHIELD‘D“ setting to get up to
120 minutes of heat-free, periodic tumbling at the end
of a cycle.
■ Stop the WRINKLE SHIELD‘D“ setting at any time by pressing
WRINKLE SHIELD‘D“ setting or opening the dryer door.
■
For the Perm Press/Casual Cycle, the WRINKLE SHIELD™
setting is preset to ON. The other Automatic Cycles will retain
the WRINKLE SHIELD‘D“ setting. For example, if you select the
WRINKLE SHIELD‘D“ setting in the Normal cycle, the
WRINKLE SHIELD‘D“ setting will be on the next time you
select the Normal cycle.
NOTE: If you do not select the WRINKLE SHIELD‘D“ setting, the
dryer stops after cool down.
Damp Dry Signal Option
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in
a mixed load. When the signal goes off, open the door to stop
the dryer, rearrange the load inside the dryer, close the door and
restart the dryer to finish the drying cycle. Rearranging the load
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the
Automatic Cycles.
Cycle Signal Option
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Loud, Soft, or Gff)
is selected.
NOTE: When the WRINKLE SHIELD™ setting is selected and the
Cycle Signal is on, a tone sounds every 5 minutes until the clothes
are removed, or the WRINKLE SHIELD‘D“ setting ends.
Follow the progress of your dryer with the drying Status indicator
lights.
Est.Time Remaining
................ Bèstf
Sensing
The beginning of a cycle and turns off 5 minutes into
the cycle.
Eco Monitor
The Eco Monitor shows your estimated energy usage compared
to the other cycles and options.
8