Whirlpool CABRIO W10305227B - Manuel (Page 5)

QUICK START GUIDE
@
BULKY ITEMS I
HEAVY DUTY
cabrio
Steam
Resource Saver
Be ! START
Mote
Minn
Medium
©
Norma
txtra Low lOn
Damp Air Only Drum Light loff
> ■ I
Dryness Wrinkle
Shield
Damp Dry
NOTE: This Use and Care Guide covers severai different modeis. Your dryer may not have aii of the cycies and features described.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance. The following is a guide to using your dryer.
Please refer to specific sections of this manual for more detailed information.
START
1. Clean the lint screen before each load.
2. Place laundry in dryer and shut door.
3. Press POWER. '
4. Select AUTOMATIC or MANUAL cycle.
5. Select OPTIONS and/or CYCLE SIGNAL, if desired.
See “Additional heatures.”
6. Press and Hold START/PAUSE to begin.
AUTOMATIC CYCLES
.Automatic Cycies match the cycle setting to the type
of load, and adjust Dryness Level for optimal performance.
See “Automatic Preset Cycle Settings Chart.”
1. Press POWER.
2. Turn knob to desired Automatic Cycle.
3. Select DRYNESS LEVEL to adjust how dry you
want the load.
4. Select OPTIONS.
5. Press arid Hold START/PAUSE.
To make changes to the Dryness Level:
NOTE: Dryne.ss selections can be made only w'hile using
.Automatic Cycles.
1. Press START/PAUSE once.
2. Select DRYNESS LEVEL.
3. Press and Hold START/PAUSE.
STOPPING, PAUSING, OR RESTARTING
To stop or pause
Open the door or press START/P.AUSE once.
Press START/PAUSE tvv'ice to cancel a cycle.
To restart
Close the door. Press and Hold START/PAUSE.
©
MANUAL CYCLES
Use Manual Cycies to set a drying time
and temperature.
1. Press POWER.
2. Turn knob to desired Manual Cycle.
3. Press TIME ADJLJST up or down .arrow buttons until the
desired drying time is displayed.
4. Press TEMP until the desired temperature illuminates.
NOTE: During the Manual Cycle, you can change the
settings for Time, Temp, fhe WRINKLE SHIELD’^'''' feature,
and Cycle Signal.
5. Press and Hold START/P.AUSE.
TfiViED DRY" Use this cycle if items are still damp after an
Auto cycle.
QUICK DRY (on some models) - LJse this cycle for drying
small loads or items requiring a short drying time.
TOUCH UP (on some models) - Use this cycle to help
smooth out wrinkles from clean, dry clothes.
STEAM CYCLES
(Steam models only)
Steam Cycies use water and heai to reduce
Vv'rinkles and odors in dry items. See “Cycles”
for more details on each cycle.
1. Press POWER.
2. Select ENHANCED TOUCH UP or QUICK REFRESH 1-4
or 5-8 Garments cycle.
3. Press TIME ADJUST up or down until the desired drying
time is displayed (only on Enhanced Touch LJp Cycle}.
4. Press TEMP until the desired temperature illuminates.
5. Press and Hold START/PAUSE.