Panasonic CQ-R825 - Manuel (Page 7)

Attenuator
• Press ATT. Volume will decrease to about 1/10 of its previous level.
• Press ATT again to deactivate when listening at normal volume.
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
VOLUME
t
FADER
BASS TREBLE
BALANCE
Bass and Treble
Press SEL to select the BASS (TREBLE) mode. Press or “N/'’ to
increase or decrease the bass/treble response.
-12 to 12 -12 to'12
• Press or for more than a half second to change numeric
levels on the display rapidly.
Balance
• Press SEL to select the BALANCE mode. Press or to shift
the sound volume to the right or left speakers.
or L 1 to 15 Balance Center
• Press or for more than a half second to change numeric
levels on the display rapidly.
Fader
• Press SEL to select the FADER mode. Press “/X" or to shift the
sound volume to the front or rear speakers.
orL 1 to 15
Balance Center
• Press or for more than a half second to change numeric
levels on the display rapidly.
Note: When a control mode (BAS/TRE/BAUFAd) is selected but no operation is made within 5 seconds
(2 seconds at volume mode), the display will return to the normal operation (Radio, Cassette, etc) mode.
In such a case, press SEL again to select the next control mode.
CQ-R825/R805EUC