Panasonic WV-CM1420 - Manuel (Page 8)

OPERATING PROCEDURES
Power Up
Before operating the monitor, confirm that the cameras and
peripherals are connected correctly and securely.
1. Turn on the monitor by pressing the POWER button.
The Power Indicator lights in green.
2. Select the desired input to be displayed by pressing
the INPUT SELECT button.
Pressing this button will select the display input in the
sequence shown below.
VIDEO IN A —VIDEO IN B-
Onscreen Display Video Input Audio Input
ACH VIDEO IN A
AUDIO IN
BOH VIDEO IN B
The selected input picture appears on the monitor
screen.
Display Setting
The Display Setting can be made onscreen as shown
below.
1. Press the MENU button.
The menu shown below appears on the monitor screen.
It will close automatically if no operation takes place
within about 10 seconds.
/-------------------- ------------ \
BRIGHT 0
CONTRAST 0
SHARPNESS 0
COLOR 0
TINT 0
AFC SHORT
CH DISPLAY OFF
STANDBY ON MODE 1
LANGUAGE ENGLISH
NORMAL SETTINGS
V____________________ V
2 .
Move the cursor to the LANGUAGE parameter in the
menu with the ▼ or A button, then select the desired
language with the 0 or (+] button.
Pressing the button will toggle the display language as
shown below.
ENGLISH FRANÇAIS
□
ESPAÑOL
S
3. Move the cursor to the BRIGHT, CONTRAST. SHARP­
NESS, COLOR, TINT parameter with the T or A but­
ton, then adjust the level of the selected item with the
B or B button.
While the level of an item is being adjusted, the indica­
tor displays the changed level as shown below.
Item Effect Indicator
BRIGHT oo
Darker Brighter
BRIGHT
CONTRAST
DO
Less More
CONTRAST
SHARPNESS
oo
Soft Sharp
SHARPNESS
COLOR
□a
Less More
COLOR
TINT
□a
Greenish Reddish
TINT
8