Connections, Connection with the camera site, Connection with the vcr – Panasonic WV-CM1420 Manuel d'utilisation

Page 6

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

CONNECTIONS

The connections described below should be made by qualified service personnel or system installers.

Shown below is an example of a basic system connection.

VCR

O □□

■ Connection with the Camera

Site

Connect the Video Output of the camera site equipment to
the VIDEO IN connectors on the rear of the monitor using
coaxial cables.
The maximum coaxial cable lengths between the cameras
are shown below.

Cable

RG-59/U RG-6/U

RG-11/U RG-15/U

3C-2V

5C-2V

7C-2V

10C-2V

Recommended

250 m

500 m

600 m

800 m

cable length

(825 ft)

(1 650 ft) (1 980 ft) (2 640 ft)

Connection with the VCR

Recording on the VCR
Connect the VIDEO OUT A or B connector on the moni­
tor to the video input of the VCR with a coaxial cable.
Connect the AUDIO OUT connector on the monitor to
the audio input of the VCR with an audio cable, if
applicable.

Monitoring the Piayback picture
Connect the video output of the VCR to the VIDEO IN A
or B connector on the monitor with a coaxial cable.

Monitoring the Playback audio
Connect the audio output'of the VCR to the AUDIO IN
connector on the monitor with an audio cable.

Advertising