Panasonic DVD-PV55 - Manuel (Page 38)

Digital settings
Turn on this unit and the equipment you
have connected.
- While stopped
I
Press [ACTION] or [MENU] to
show the initial settings screen.
2
Use the cursor jockey [▲, ▼] to
select “6 Digital Audio Output”
and press [ENTER].
Use the cursor jockey [A, T] to
select an item and press
[ENTER].
(For details, see below)
___ Digital Audio Output
ih PCM DwmConmiion No
; 2 Dolby Digital Bitstrasm
i 3 DTS Digital Sumxiitf PGM
I Pivee RETURN to exit
Press [RETURN] to complete the
settings.
■ To return to the previous menu
Press [RETURN].
ggjiaiDgg
■ PCM Down Conversion: Output during play of DVDs recorded in 96 kHz linear PCM.
No
: When you have connected an amplifier with stereo connection cables.
Yes: When you have connected an amplifier with an optical fiber cable.
Copyright protection limits digital output to 48 kHz/16 bit.
When playing DVDs recorded in 96 kHz
Sound is output as follows in accordance with the connections and settings you have made.
'""-'-^^nnection
Setting^"\^
Analogue Digital
No
Output as 96 kHz No output
{Audio will be output at 96 kHz if the
DVD has not had copyright protection
recorded on it.»)
Yes Converted and output as 48 kHz/16 bit Converted and output as 48 kHz/l6 bit
isThe connected equipment must be able to handle 96 kHz LPCM in order to take advantage of the
high quality audio found on these discs.
■ Dolby Digital: Output during play of DVDs recorded with Dolby Digital.
Bitstream:
When you have connected a unit with a built-in Dolby Digital decoder
PCM : When you have connected a unit that doesn't have a built-in Dolby Digital decoder
■ DTS Digital Surround: Output during play of DVDs recorded with DTS Digital Surround.
PCM : When you have connected a unit that doesn’t have a built-in DTS decoder
Bitstream: When you have connected a unit with a built-in DTS decoder
ШЛЛштЛшШ
Ensure “Dolby Digital” and “DTS Digital Surround" are set to "PCM" if you connect this unit to a digital
ET!V amplifier without a decoder. If the signals are output as bitstream, “noise" will be output which can
Bill cause harm to your ears and speakers and the signal will not be correctly recorded onto MDs.
'QT8644