Panasonic DVD-PV55 - Manuel (Page 36)

Speaker settings
Turn on this unit and the equipment you have connected.
. While stopped
1
Press [ACTION] or [MENU] to show the initial settings screen.
2
Use the cursor jockey [A, T] to select “7 Speaker Setting” and press
[ENTER].
Use the cursor jockey [ A, T] to select an item and press [ENTER].
Factory Preset .Multi-channel
When you have connected 3 or more speakers.
•2-channel
When you have connected 2 speakers or a
Dolby Pro Logic amplifier.
The initial settings screen is restored if you se­
lect “2-channel”.
SL
QL
mA
speaker Setting _
_1 Multi-otwnel^
2 2-channel
i Press RETURN to exit
When you select Multi-channel
The screen shown below appears.
Use the following procedure to adjust the settings for ©, O ^nd O-
1. Use the cursor jockey [A, ▼, ◄, ►] to select the item and press [ENTER].
2. Use the cursor jockey [A, ▼] to change the setting and press [ENTER].
3. Select “Exit” and press [ENTER].
Press [RETURN] to complete the settings. * •
■ To return to the previous menu
Press [RETURN],
• If you have used an optical fiber cable to connect this unit digi­
tally to another unit, make the settings on the other unit.
•The setting is shown on the unit’s display when a multi-channel
disc is being played right).
When set to “Multi-channel’
/ IMD mix
------------1 --... - -
When set to “2-channel”
O Center
O Front(L)
Exit
Test signal
O Surround (L)
O Surround (L)
O Center
VQTS644
O Surround
O Center
O Front (R)
0 Subwoofer
0 Subwoofer
0 Surround (R)
O Surround (R)