Troubleshooting guide, Displays – Panasonic DVD-LV70 Manuel d'utilisation

Page 44

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Troubleshooting Guide

Problem

Solution

Page

The monitor is dark.

Adjust the brightness.

19

The picture is disrupted
during fast forward and

rewind.

Some disruption is normal.

No picture on the monitor
(including video from

another unit).

Check connections.

31

Ensure the video input setting is correct.

•While you are playing a disc “LINE-IN” should be off.

•While you are viewing video from other equipment "LINE-

IN” should be on.

31

Select a picture mode other than “4 (Off)".

19

Ensure the power of the connected equipment is on.

Picture doesn’t appear on

the television (or the size
of the picture seems
wrong).

Check connections.

32

Check that the television is on.

Check that the input mode on the television is correct.

Check the settings in “5 TV Aspect”.

33

LCD pixels turn black or

radiate different colors.

The LCD is constructed with precision technology so 99.99 %
of the pixels are active, but of the remaining of 0.01 %, there
are pixels that may be black or emit light constantly.

This phenomenon is not a malfunction.

Displays

RQT5897

NO PLAY

The unit cannot play this disc.

8

“bAT Err” and a number

“bAT Err 1”;

A problem has occurred with the battery pack.

appear on the display.

Consult your dealer.

“bAT Err

2”: The pack has been recharging for

12 hours but has failed to recharge for some

reason. Recharge again.

“bAT Err 3”:

The battery pack has overheated during

recharging. Allow the pack to cool down
before recharging again.

Messages do not appear

Go to the initial settings menu and turn the On-Screen

28

on the television.

Messages on.

On-Screen Menu Icons

Go to the initial settings menu and change the position of

28

are cut off or are not
displayed at all.

the On-Screen Menu Icons.

U11

Wipe the disc clean.

9

HDD

Trouble has occurred. The number appearing after H

□□ stands for a number.

depends on the problem. Turn the unit oft and on again.
Alternatively, turn the unit off, disconnect the power source

(AC or battery pack), reconnect the power and turn the unit

on again.

If the service numbers fail to clear, note the service number

and contact a qualified service person.

Advertising
Ce manuel est liée aux produits suivants: